Cobra NavOne 2000 User Manual Download

Page: 103 / 105

At any place on the trail, while at the



Trail Mode screen

Press the HERE function button to proceed to the



GPS Data screen

Press the SAVE function button to proceed to the



Save or Edit Name menu

At the



Save or Edit Name menu



The default name can be accepted.



A user-defined name can be entered.

At the



Save or Edit Name menu

Press ENTER or the SAVE function button to accept the
default name and return to the



Trail Mode screen

At the



Save or Edit Name menu

Press the CLEAR function button to clear the default name.

Enter the name of choice using spell mode and press ENTER or the
SAVE function button.

The name will be saved and the system will return to the



Trail Mode screen

Enter a



user-defined

n a m e



NOTE

An attempt to enter more
than 50 waypoints will result
in the



Trail Memory is

Full screen

rather than

the



Save or Edit Name

when the SAV E

function button is pressed.

Accept the



d e fault name

Name the



waypoint

Add waypoints . . . . . . . .



to the trail

22 B Trail Mode 6/15/04 5:40 PM Page 86

Summary of Contents for NavOne 2000










































































































Search results

Summary of Contents for NavOne 2000

Reviews:

Related manuals for NavOne 2000

Brands by name

Popular brands

Cobra NavOne 2000, User Manual

Search results

Summary of Contents for NavOne 2000

Reviews:

Related manuals for NavOne 2000

Brands by name

Popular brands