Customer Assistance
Warranty
Introduction
Operation
English
Mode Funnctions
10
11
Nothing
comes close to a Cobra
®
Privacy Code Scan
•
Your microTALK
®
radio can automatically scan the privacy codes (00
through 38) within one (1) channel.
To Scan Privacy Codes:
1. While in Standby Mode, press the Channel Up
or Channel Down button to choose the
channel on which you wish to scan privacy
codes.
2. Press the Mode button until the Scan icon and
the privacy code numbers flash on the display.
3. Press the Channel Up or Channel Down button
to begin scanning privacy codes within the
channel you selected.
The Scan icon will continue to be displayed when
privacy code scan is On. Your radio will continue
to scan privacy codes and stop as an incoming
transmission is detected. Your radio will remain
on that channel/privacy code for ten (10)
seconds.
While setting privacy code scan, if you do not
press any buttons for fifteen (15) seconds your
radio will automatically return to Standby Mode
on the channel/privacy code that was displayed
before you entered Mode Functions.
During An Incoming Transmission,
You Can Choose From The Following:
a. Press and hold the Talk button to communicate on that
channel/privacy code. Your radio will remain on that
channel/privacy code and return to Standby Mode.
b. Press the Channel Up or Channel Down button to resume
scanning privacy codes.
If you press the Talk button while scanning and not within ten (10)
seconds of receiving a transmission, you will transmit on the
channel/privacy code on which you last received a transmission. This
will return the radio to Standby Mode.
If you do not press any button within ten (10) seconds, your radio will
automatically resume scanning privacy codes.
During Scanning (while not receiving a transmission),
You Can Choose From The Following:
a. Press and hold the Talk button to communicate on the
channel/privacy code that was displayed before you entered Mode
Functions or the channel/privacy code on which, during scanning,
you last received a transmission. This will return the radio to
Standby Mode.
b. Press the Mode button to proceed to other functions.
c. Press the Lock button to return to Standby Mode on the
channel/privacy code that was displayed before you entered Mode
Functions or the channel/privacy code on which, during scanning,
you last transmitted or received.
Operation
Channel Button
Mode Button
Select Channel
Scan Privacy Codes
