background image

English

Licensing & Service

14

Operation

Warranty

Introduction

15

Nothing 

comes close to a Cobra

®

Customer Assistance

IMPORTANT NOTICE: FCC LICENSE REQUIRED

This two-way radio operates on GMRS (General Mobile Radio Service) frequencies which 
require an FCC (Federal Communications Commission) license. A user must be licensed prior 
to operating on channels 1 through 7 or 15 through 22, which comprise the GMRS channels 
of this radio. Serious penalties could result for unlicensed use of GMRS channels, in violation 
of FCC rules, as stipulated in the Communications Act’s Sections 501 and 502 (amended). 

Licensed users will be issued a call sign by the FCC, which should be used for station
identification when operating this radio. GMRS users should also cooperate by engaging 
in permissible transmissions only, avoiding channel interference with other GMRS users, 
and being prudent with the length of their transmission time. 

For licensing information and application forms, please call the FCC Hotline at 
800-418-FORM. Request form #159 and form #605. Questions regarding the license 
application should be directed to the FCC at 888-CALL-FCC. Additional information 
is available on the FCC’s website at www.fcc.gov.

Safety Information for microTALK

®

Radios

Your wireless handheld portable transceiver contains a low power transmitter. When the Talk
button is pushed, it sends out radio frequency (RF) signals. The device is authorized to operate 
at a duty factor not to exceed 50%. In August 1996, the Federal Communications Commissions
(FCC) adopted RF exposure guidelines with safety levels for handheld wireless devices. 

Important:
FCC RF Exposure Requirements: For body-worn operation, this radio has been tested and meets
the FCC RF exposure guidelines when used with Cobra

®

accessories supplied or designated for

this product. Use of other accessories may not ensure compliance with FCC RF exposure guidelines.
Use only the supplied antenna. Unauthorized antennas, modifications, or attachments could
damage the transmitter and may violate FCC regulations. 

Normal Position: 
Hold the transmitter approximately 2 inches from your face and speak in a normal voice, 
with the antenna pointed up and away.

This device complies with part 15 of the FCC Rules. Operation is subject to 
the following two conditions: (1) This device may not cause harmful interference,
and (2) this device must accept any interference received, including interference
that may cause undesired operation.

FCC Warnings: Replacement or substitution of transistors, regular diodes or
other parts of a unique nature, with parts other than those recommended by
Cobra

®

may cause a violation of the technical regulations of part 95 of the FCC

Rules, or violation of type acceptance requirements of part 2 of the Rules.

Customer Assistance

Product Service Questions

If you have any questions about operation or installing your new
Cobra

®

product, or if you are missing parts… 

Please call Cobra

®

first! DO NOT RETURN THIS PRODUCT TO THE

STORE! See customer service on page A1.
For Products Purchased in the U.S.A.

If your product should require factory service, please call Cobra

®

first before

sending your radio. This will ensure the fastest turn-around time on your
repair. You may be asked to send your radio to the Cobra

®

factory. It will be

necessary to furnish the following to have the product serviced and
returned.

1) For Warranty Repair include some form of proof-of-purchase, such as a

mechanical reproduction or carbon of a sales receipt. If you send the
original receipt, it cannot be returned;  

2) Send the entire product;  

3) Enclose a description of what is happening with the radio. Include a typed

or clearly printed name and address of where the radio is to be returned;  

4) Pack radio securely to prevent damage in transit. If possible, use the

original packing material;  

5) Ship prepaid and insured by way of a traceable carrier such as United

Parcel Service (UPS) or First Class Mail to avoid loss in transit to Cobra
Factory Service, Cobra Electronics Corporation, 6500 West Cortland
Street, Chicago, Illinois 60707 USA;  

6) If the radio is in warranty, upon receipt of your radio it will either be

repaired or exchanged depending on the model. 

Please allow approximately 3 – 4 weeks before contacting Cobra

®

for status.

If the radio is out of warranty, a letter will automatically be sent informing
you of the repair charge or replacement charge. If you have any questions,
please call 773-889-3087 for assistance.

For products purchased outside the U.S.A.

Please contact your local dealer for product service information.

Summary of Contents for microTALK PR560












Reviews: