Customer Assistance
Warranty
Introduction
19
Nothing
Comes Close to a Cobra
®
Operation
18 English
Mode Functions
If you press the
Talk
button while scanning, but more than
10 seconds after receiving a transmission, you will transmit on
the memory location on which, during scanning, you last received
a transmission. This will return the radio to
Standby
mode.
If you do not press any button within 10 seconds, your radio
will automatically resume scanning memory locations.
During memory location scan (while not receiving a
transmission), you can choose from the following:
a.
Press and hold the
Talk
button to communicate on the
channel/privacy code that was displayed before you entered
mode functions or memory location on which, during
scanning, you last received a transmission.
b.
Press the
Mode/Lock
button to proceed to other functions.
c.
Press the
Enter/Hi•Low
button to return to
Standby
mode
on the channel/privacy code that was displayed before you
entered mode functions or the memory location on which,
during scanning, you last received a transmission.
To reduce the number of memory locations being scanned,
you may de-program any unwanted locations. (See page 13
to de-program a memory location.)
10 Call Tone Settings
•
You can choose from 10 different call tone settings to transmit
a unique call alert.
To change a call tone setting:
1.
Press the
Mode
button until the letter “C” and
the current call tone number (01 through 10)
is displayed.
2.
Press the
Channel Up
or
Channel Down
button to hear the other call tone settings.
3.
Choose one of the following:
a.
Press the
Mode/Lock
button to enter the
new setting and proceed to other functions.
b.
Press the
Enter/Hi•Low
button to enter the
new setting and return to
Standby
mode.
Roger Beep Confirmation Tone
•
Roger Beep
is an audible tone that your listener will hear when you
release the
Talk
button. This alerts the other party that you are
finished talking and it is OK for them to speak.
To turn roger beep on or off:
1.
Press the
Mode
button until the
Roger Beep
icon flashes on the display. The current
on
or
off
setting is displayed.
2.
Press the
Channel Up
or
Channel Down
button to select roger beep
on
or
off
.
3.
Choose one of the following:
a.
Press the
Mode/Lock
button to enter
the new setting and proceed to other
functions.
b.
Press the
Enter/Hi•Low
button to enter the
new setting and return to
Standby
mode.
Keystroke Tones
•
With
Keystroke Tones
turned
on
, your radio will sound
beeps each time you press a button or change a setting.
To change keystroke tones:
1.
Press the
Mode/Lock
button until the
Keystroke Tones
icon flashes on the display.
The current
on
or
off
setting is displayed.
2.
Press the
Channel Up
or
Channel Down
button to turn keystroke tones
on
or
off
.
3.
Choose one of the following:
a.
Press the
Mode/Lock
button to enter the
new setting and return to
Standby
mode.
b.
Press the
Enter/Hi•Low
button to enter the
new setting and return to
Standby
mode.
Operation
Mode/Lock Button
Call Tone Setting
Channel Buttons
Mode/Lock Button
Keystroke Tones On
Channel Buttons
Mode/Lock Button
Roger Beep On
Channel Buttons
