background image

Customer Assistance

Warranty

Introduction

Operation

Turning on Your microTALK

®

Radio

Press and hold the 

Mode/Power

button until you

hear a series of audible tones indicating the radio
is 

on

.

Your microTALK

®

radio is now in 

Standby

mode,

ready to receive transmissions. The radio is
always in 

Standby

mode except when the 

Talk

,

Call

or 

Mode/Power

buttons are pressed.

Battery Low

When battery power is low, the 

Battery Low

icon

will blink. Your batteries should be replaced or
recharged, if using rechargeable batteries.

Auto Battery Save

If there are no transmissions within 10 seconds,
the radio will automatically switch to 

Battery

Save

mode and the 

Power Saver

icon will flash

in the display. This will not affect the radio’s
ability to receive incoming transmissions.

Communicating with Another Person

1.

Press and hold the 

Talk

button.

2.

With the microphone about two inches 
(5 cm) from your mouth, speak in a 
normal voice.

3.

Release the 

Talk

button when you are 

finished talking and listen for a response.

You cannot receive incoming calls while 
pressing the 

Talk

button.

Both radios must be tuned to the 
same channel to communicate.

2

Speaker/Microphone/Charge Jack

To attach a speaker/microphone:

1.

Open the speaker/microphone/charge 
tab on top of your microTALK

®

radio.

2.

Insert the plug into the speaker/
microphone/charge jack.

To connect a wall charger/adapter:

1.

Open the speaker/microphone/charge 
tab on top of your microTALK

®

radio.

2.

Insert the wall charger/adapter plug 
into the speaker/microphone/charge jack.

Earbud Microphone

1.

Plug earbud microphone into radio.

2.

Place earbud in ear.

3.

Clip microphone onto clothing 3" to 6" from
your mouth.

4.

Push to talk.

Using Your Radio

Operation

3

Speaker/Microphone
/Charge Jack

Quick Start

1.

Press and hold the 

Mode/Power

button 

to turn 

on

your radio.

2.

Press the 

Channel Up

or 

Channel Down

button to select a channel.

Both radios must be tuned to the 
same channel to communicate.

3.

Press and hold the 

Talk

button while 

speaking into the microphone.

4.

When finished talking, release the 

Talk

button and listen for a response.

Mode/Power

Battery Low

Talk Button

Battery Save Mode

Two Inches (5 cm)
from Mouth

Radio Charger Jack

Placed in Ear

Clipped to Clothing

1

2

3

PR700-2WX VP-D-FINAL  5/1/06  7:01 AM  Page 2

Summary of Contents for microTALK PR 700 WX













Reviews: