background image

MODE FUNCTIONS

Dual Watch

Dual Watch allows you to simultaneously monitor
any two (2) Dual Watch Locations:
Dual Watch Location 1 – is always the channel/

privacy code displayed before you entered MODE
functions. See “Channels,” “CTCSS Privacy
Codes” and “DCS Privacy Codes” sections for
further details.

Dual Watch Location 2 – will be stored in the radio.

It can be edited and/or recalled for future
engagements of DUAL WATCH MODE.

To Program or Edit Dual Watch
Location 2 And Engage Dual Watch Mode:

1. Press the MODE button until

the Dual Watch icon and the
channel number flash on the
display.

2. Choose one of the following:

a. Select or edit a channel:

1) Press the CHANNEL UP or CHANNEL DOWN

button to select a channel (1 to 8).

b. Select or edit a channel/privacy code:

1) Press the CHANNEL UP or CHANNEL DOWN

button to select a channel (1 to 8).

2) Press the MODE button to set the channel.

The small numbers next to the channel
number will flash on the display.

3) Press the CHANNEL UP or CHANNEL DOWN

button to select a CTCSS privacy code
(01 to 38) or DCS privacy code (01 to 83).

English

During An Incoming Transmission,
You Can Choose From The Following:

a. Press and hold the TALK button to

communicate on that Dual Watch Location.
Your radio will remain on that Dual Watch
Location and return to LISTENING MODE.

b. Press the CHANNEL UP or CHANNEL DOWN

button to resume Dual Watch.

If you press the TALK button while in Dual Watch
and not within 10 seconds of receiving a
transmission, you will transmit on the last
Dual Watch Location on which you received
a transmission. This will return the radio to
LISTENING MODE.
If you do not press any button within 10 seconds,
your radio will automatically resume Dual Watch.

To Terminate Dual Watch:

Choose one of the following:

a. Press the LOCK/ENTER button to return to

LISTENING MODE on either Dual Watch
Location 1 or the last Dual Watch Location
on which, during Dual Watch, you last
received a transmission.

b. Press the TALK button to return to

LISTENING MODE on either Dual Watch
Location 1 or the last Dual Watch Location
on which, during Dual Watch, you last
received a transmission.

c. Press the MODE button and proceed to the

next available MODE function.

3. Press the LOCK/ENTER button

to set Dual Watch Location 2
and engage DUAL WATCH
MODE (see below for further
details).

NOTES: To terminate Dual Watch and proceed to the

next available MODE function, press the
MODE button.

While setting Dual Watch Location 2, if you
do not press any buttons for 15 seconds
your radio will automatically return to
LISTENING MODE on Dual Watch Location 1.

To Turn Dual Watch ON:

NOTE: Dual Watch Location 2 must be programmed

to turn Dual Watch ON.

1. Set the first Dual Watch

Location (channel/privacy
code) you wish to monitor
(see “Channels,” “CTCSS
Privacy Codes” and “DCS
Privacy Codes” sections for
further details).

2. Press the MODE button until the Dual Watch icon

and the channel number flash on the display.

NOTE: While setting Dual Watch, if you do not press

any buttons for 15 seconds your radio will
automatically return to LISTENING MODE on
the last channel or channel/privacy code
displayed before you entered MODE functions.

3. Press the LOCK/ENTER button to engage

DUAL WATCH MODE.

Lock/Enter Button

Select Dual Watch

Select Channel

10376 MT975_Brit.Turkish.qxd:MT_975_UK  1/15/08  12:01 PM  Page 8

Summary of Contents for microTALK MT 975











Reviews: