MODE FUNCTIONS
c. Press the TALK button to enter the
channel/privacy code in the selected memory
location and exit MODE functions. Upon
release of the TALK button, the radio will enter
LISTENING MODE on the channel/privacy code
just entered.
To Recall a Stored Memory Channel
Location:
1. Press the MODE button until the Memory icon
and the memory location number flash on the
display.
2. Press the CHANNEL UP or CHANNEL DOWN
button to select a memory location (0 through 9).
NOTE: If a location has been programmed before,
its associated channel/privacy code will be
shown on the display.
3. Press the TALK button to return to LISTENING
MODE on the selected memory location.
NOTE: A memory location can be reprogrammed
at any time it is displayed and flashing.
Press the LOCK/ENTER button to begin.
While recalling a stored memory location, if you
do not press any buttons for 15 seconds, your radio
will automatically return to LISTENING MODE on the
channel/privacy code displayed before you entered
MODE functions.
To De-Program a Memory Location:
1. Press the MODE button until the Memory icon
and the memory location flash on the display.
English
Channel Scan
Your microTALK
®
radio can automatically scan
channels (1 to 8).
NOTE: The radio ignores specific CTCSS or DCS
privacy codes while scanning channels.
To Scan Channels:
1. Press the MODE button
until the Scan icon and the
channel number flash on
the display.
2. Press the CHANNEL UP or CHANNEL DOWN
button to begin scanning channels.
The Scan icon will continue to be displayed when
channel scan is ON. Your radio will continue to scan
all channels and stop if an incoming transmission
is detected. Your radio will remain on that channel
for 10 seconds.
During An Incoming Transmission,
You Can Choose From The Following:
a. Press and hold the TALK button to
communicate on that channel. Your radio
will remain on that channel and return to
LISTENING MODE.
b. Press the CHANNEL UP or CHANNEL DOWN
button to resume scanning channels.
If you do not press any button within 10 seconds,
your radio will automatically resume scanning
channels.
2. Press the CHANNEL UP or CHANNEL DOWN button
to select the memory location (0 through 9).
NOTE: If a location has been programmed before,
its associated channel/privacy code will be
shown on the display.
3. Press the LOCK/ENTER button. The channel
numbers will flash on the display.
4. Press the CHANNEL UP or
CHANNEL DOWN button to
select Channel O.
5. Choose one of the following:
a. Press the LOCK/ENTER
button to enter the channel/privacy code in
the selected memory location and return to
the beginning of memory location options.
b. Press the MODE button to enter the
channel/privacy code in the selected memory
location and proceed to other functions on the
channel/privacy code displayed before you
entered MODE functions.
While de-programming a memory location, if you
do not press any buttons for 15 seconds, your radio
will automatically return to LISTENING MODE on the
channel/privacy code displayed before you entered
MODE functions.
Privacy Code Scan
Your microTALK
®
radio can automatically scan the
Privacy Codes (either CTCSS 01 through 38 or DCS
01 through 83) within one channel. Only one set
of privacy codes (CTCSS or DCS) can be scanned
at a time.
To Scan Privacy Codes:
1. While in LISTENING MODE,
press the CHANNEL UP or
CHANNEL DOWN button
to choose the channel on
which you wish to scan
privacy codes.
2. Press the MODE button until
either the CTCSS or the DCS
icon appears on the display
and the Scan icon and the
small numbers next to the
channel number flash on the display.
3. Press the CHANNEL UP or CHANNEL DOWN
button to begin scanning privacy codes within
the channel you selected.
The Scan icon will continue to be displayed when
privacy code scan is ON. Your radio will continue
to scan privacy codes and stop as an incoming
transmission is detected. Your radio will remain
on that channel/privacy code for 10 seconds.
Select Channel
Select Scan Channels
Channel O
Select Scan Privacy
Codes
10376 MT975_Brit.Turkish.qxd:MT_975_UK 1/15/08 12:01 PM Page 6