background image

OPERATION

Listening for a Response

Release the TALK button to
receive incoming transmissions.
Your microTALK

®

is always in

LISTENING MODE except when
the TALK, CALL or MODE
buttons are pressed.

To Adjust Volume

Rotate the ON/OFF Volume
knob clockwise to increase
volume and counterclockwise
to reduce it.

Call Button

Press and release the CALL
button.
The other person will hear a
two (2) second ringing tone.
You cannot receive transmissions
while sending a call.

NOTE: Both radios must be tuned to the same

channel and privacy code to communicate.

English

To Illuminate Display

Press and release the
LIGHT/MAX RANGE button
to illuminate the display for
10 seconds.

Auto Squelch/
Maximum Range Extender

Your microTALK

®

radio is equipped with Auto

Squelch, which automatically shuts off weak
transmissions and unwanted noise resulting from
terrain, conditions, or from reaching your maximum
range limit.
You can temporarily turn OFF Auto Squelch or turn
ON Maximum Range Extender, allowing all signals
to be received and extending the maximum range
of your radio.

To Temporarily Turn OFF Auto Squelch:

– Press the LIGHT/MAX RANGE button for

less than five (5) seconds.

If you hear two (2) beeps, you have turned the
Maximum Range Extender ON (see below).

To Turn Maximum Range Extender ON:

– Press and hold the LIGHT/MAX RANGE button for

at least five (5) seconds until you hear two (2)
beeps, indicating that the Maximum Range
Extender is ON.

To Turn Maximum Range Extender OFF:

– Press and release the LIGHT/MAX RANGE button

or change channels.

Channels

With the radio ON, select any of
the 8 channels by pushing the
CHANNEL UP or CHANNEL
DOWN button.
You can press and hold the
CHANNEL UP or CHANNEL
DOWN button for fast advance.

NOTE: Both radios must be

tuned to the same
channel and privacy code
(see “CTCSS Privacy Codes” or
“DCS Privacy Codes”) to communicate.

Lock Function

The LOCK/ENTER button locks the CHANNEL UP,
CHANNEL DOWN, and MODE buttons to prevent
accidental operation.

To Use the Lock Function:

– Press and hold the LOCK/ENTER

button for two (2) seconds to
turn the Lock ON or OFF.

A double beep sound is used
to confirm your Lock ON or OFF
request. When the radio is in
LOCK MODE, the Lock icon will
be displayed.

microTALK

®

Range

Your microTALK

®

radio has a range of up to

12 kilometres (7.5 miles). Your range will vary
depending on terrain and conditions.
In flat, open country, your radio
will operate at maximum range.
Buildings and foliage in the
path of the signal can reduce
the range.
Dense foliage and hilly terrain
will further reduce the signal.
Remember, you can achieve
maximum range by using
Maximum Range Extender.
See above for details.

Light/Max Range
Button

Call Button

Lock/Enter Button

Channel Buttons

Channels

Lock Icon

Maximum Range

Reduced Range

Reduced Range

Listening

ON/OFF Volume
Knob

10376 MT975_Brit.Turkish.qxd:MT_975_UK  1/15/08  12:01 PM  Page 3

Summary of Contents for microTALK MT 975











Reviews: