Cobra microTALK CXT390 Owner'S Manual Download

Page: 7 / 8

Customer Assistance Warranty

Introduction

Operation

Mode Functions

Operation

Mode Functions

Channel Scan

Your microTALK

radio can automatically scan channels.

To scan channels:
1.

Press the

Mode/Power

button until the

Scan

icon and the channel numbers appear

on the display.

Press the

Channel

Down

button to

begin scanning channels.

The radio ignores specific privacy

codes while scanning channels.

The

Scan

icon will continue to be displayed when

scan is

. Your radio will continue to scan all

channels and stop if an incoming transmission is

detected. Your radio will remain on that channel for

10 seconds.

During scanning (while receiving an incoming transmission),

you can choose from the following:

Press and hold the

Talk

button to communicate on that channel.

Your radio will remain on that channel and return to

Standby

mode.

Press the

Channel

Down

button to resume

scanning channels.

Press the

Lock

button to return to

Standby

During scanning (while receiving an incoming transmission),

you can choose from the following:

Press and hold the

Talk

button to communicate on that channel/

privacy code. Your radio will remain on that channel/privacy code

and return to

Standby

mode.

Press the

Channel

Down

button to

resume scanning privacy codes. If you do not press any button

within 10 seconds, your radio will automatically resume scanning

privacy codes.

Press the

Lock

button to return to

Standby

Scan Channels

LUME

CALL

MODE

CHANNEL

Channel Button

LUME

CALL

MODE

CHANNEL

Mode/Power

During scanning (while receiving an incoming transmission),

you can choose from the following:

Press and hold the

Talk

button to communicate on that channel/

privacy code. Your radio will remain on that channel/privacy code

and return to

Standby

mode.

Press the

Channel

Down

button to

resume scanning privacy codes. If you do not press any button

within 10 seconds, your radio will automatically resume scanning

privacy codes.

Press the

Lock

button to return to

Standby

Privacy Code Scan

•

Your microTALK radio can automatically scan the

Privacy Codes

(either

CTCSS 01 through 38 or DCS 01 through 83) within one channel. Only

one set of privacy codes (CTCSS or DCS) can be scanned at a time.

To scan privacy codes:
1.

While in

Standby

mode, press the

Channel

Down

button to choose the channel on

which you wish to scan privacy codes.

Press the

Mode/Power

button until either the

CTCSS or the DCS icon appears on the display

and the

Scan

icon and the privacy code numbers

flash on the display.

Press the

Channel

Down

button

to begin scanning privacy codes within the

channel you selected.

Select Channel

Scan Privacy Codes

LUME

CALL

MODE

CHANNEL

Mode/Power

Summary of Contents for microTALK CXT390









Search results

Summary of Contents for microTALK CXT390

Reviews:

Related manuals for microTALK CXT390

Brands by name

Popular brands

Cobra microTALK CXT390, Owner'S Manual

Search results

Summary of Contents for microTALK CXT390

Reviews:

Related manuals for microTALK CXT390

Brands by name

Popular brands