o
Operation
Customer
Assistance
Warranty
Notice
ons
o
Operation
Customer
Assistance
Warranty
Notice
ons
Intro
Operation
Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Customer Assistance
Warranty
Introduction
Operation
Intro
Operation
Customer
Assistance
Warranty
Notice
Secondary Icons
10
Mode Functions
Operation
Intro
Operation
Customer
Assistance
Warranty
Notice
Secondary Icons
11
3.
When your desired CTCSS privacy code is
displayed, choose one of the following:
a.
Press the
Mode
button to enter the new
setting and proceed to other functions.
b.
Press the
Lock/Enter
button to enter the
new setting and return to
Standby
mode.
c.
Do not press any buttons for 15 seconds
to enter the new setting and return to
Standby
mode.
Set DCS Privacy Codes
•
To select a DCS privacy code:
1.
After selecting a channel, press the
Mode
button until the DCS icon appears and the
small numbers flash on the display
(01 through 104).
If CTCSS is turned
on
at the channel
selected, the display will flash the
DCS icon and “OFF.” To switch from
CTCSS to DCS, press the
Channel Up
or
Channel Down
button while the
display is flashing “OFF.” The display
will then show the small numbers
flashing and you will then be able
to proceed to step 2.
2.
Press the
Channel Up
or
Channel Down
button to select a DCS privacy code. You can
hold the
Channel Up
or
Channel Down
button
for fast advance.
3.
When your desired DCS privacy code is
displayed, choose one of the following:
a.
Press the
Mode
button to enter the new
setting and proceed to other functions.
b.
Press the
Lock/Enter
button to enter the
new setting and return to
Standby
mode.
c.
Do not press any buttons for 15 seconds
to enter the new setting and return to
Standby
mode.
DCS Privacy Code
LI
73
00
Mode Button
Intro
Operation
Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Privacy Codes
•
Your microTALK
®
radio incorporates two (2) advanced coded squelch
systems that can help to reduce interference from other users on any
given channel. CTCSS (Continuous Tone Coded Squelch System)
provides 38 privacy codes and DCS (Digitally Coded Squelch)
provides 104 privacy codes. This provides a total of 142
Privacy
Codes
. Either system can be used on all channels, but both systems
cannot be used on the same channel at the same time.
To successfully communicate using a privacy code, both
the sending and receiving radios must be tuned to the same
channel and to the same privacy code system (CTCSS or
DCS) and privacy code number. Each channel will remember
the last privacy code system and number you select.
The privacy code 00 is not a privacy code, but allows all
signals to be heard on a channel that is set to 00 on both
the CTCSS and DCS systems.
Set CTCSS Privacy Codes
•
To select a CTCSS privacy code:
1.
After selecting a channel, press the
Mode
button until the CTCSS icon appears
and the small numbers flash on the display
(01 through 38).
If DCS is turned
on
at the channel
selected, the display will flash the
CTCSS icon and “OFF.” To switch from
DCS to CTCSS, press the
Channel Up
or
Channel Down
button while the
display is flashing “OFF.” The display
will then show the small numbers
flashing and you will then be able
to proceed to step 2.
2.
Press using the
Channel Up
or
Channel
Down
button to select a CTCSS privacy
code. You can hold the
Channel Up
or
Channel Down
button for fast advance.
CTCSS Privacy Code
LI
73
00
Mode Button
LI
73
00
Channel Button
LI
73
00
Channel Button
