![background image](http://html.mh-extra.com/html/cobra/microtalk-cxr950/microtalk-cxr950_owners-manual_2631131005.webp)
Intro
Operation
Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Intro
Operation
Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Intro
Operation
Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Intro
Operation
Customer
Assistance
Warranty
Notice
Secondary Icons
Intro
Operation
Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Customer Assistance
Warranty
Introduction
5
Operation
Intro
Operation
Customer
Assistance
Warranty
Notice
Secondary Icons
4
Using Your Radio
Channels
•
With the radio
on
, select any of the
22 channels by pressing the
Channel Up
or
Channel Down
button.
Both radios must be tuned to the
same channel to communicate.
Channels 1 through 7 are shared by FRS and
GMRS. Channels 8 through 14 are FRS only.
Channels 15 through 22 are GMRS only.
See page 26 for FRS/GMRS frequency
allocations and compatibility charts.
Listening for a Response
•
Release the
Talk
button to receive incoming
transmissions. Your microTALK
®
radio is always
in
Standby
mode while the
Talk
or
Call
buttons
are not pressed.
Call Button
•
To alert another person that you are calling:
–
Press and release the
Call
button.
The other person will hear a two (2) second
call tone. This tone is used only to establish
voice communications.
See page 24 on how to select from
10 available call tone settings.
To Illuminate Display
•
Press and release the
Light/Max Range
button to illuminate the display for
10 seconds.
Operation
Intro
Operation
Customer
Assistance
Warranty
Notice
Secondary Icons
Time-out Timer
•
The Time-out Timer feature limits transmit time
to three (3) continuous minutes to extend battery
life and prevent accidental operation. After three
(3) continuous minutes of transmission, the
radio will stop transmitting and will require a rest
period of 30 seconds. During this time the
display will flash on and off, and an error tone
will sound if the
Push-to-Talk
button is pressed.
Selectable High•Medium•Low
Power Output
•
When in close proximity to another party or during
favorable conditions, you can switch from
High
to
Medium
to
Low Power
to extend battery life.
This feature applies to GMRS Channels
1 through 7 and 15 through 22 only.
Channels 8 through 14 operate
exclusively on low power.
To switch from high to medium to low power:
–
Press and release the
Hi•Low
button.
When in High Power and using Channels 1
through 7 and 15 through 22, the
Hi
icon will be
visible in the LCD display.
When in Medium Power and using Channels 1
through 7 and 15 through 22, the
Med
icon will
be visible in the LCD.
When in Low Power or while using channels 8
through 14, the
Low
icon will be visible in the
display.
When using an external speaker/
microphone accessory on channels 1-7
or 15-22, your microTALK
®
radio will
only operate on medium or low power.
LI
73
00
Channel Button
Channel Number
Listening
Call Button
LI
73
00
Hi-Low Button
Hi Power Icon
Low Power Icon
Light/Max Range
Medium Power Icon
Talk Button