Voice Activated Transmit (VOX)
•
In
VOX
mode, your microTALK radio can be used “hands-free,”
automatically transmitting when you speak. You can set the
VOX
sensitivity level to fit the volume of your voice and avoid
transmissions triggered by background noise.
To turn VOX mode on or off:
1.
Press the
Mode
button until the
VOX
icon
flashes on the display. The current
on
or
off
setting is displayed.
2.
Press the
Channel Up
or
Channel Down
button to turn VOX
on
or
off
.
3.
Choose one of the following:
a.
Press the
Mode
button to enter the
selected
on
or
off
setting and proceed
to other functions.
b.
Press the
Lock/Enter
button to enter
the selected
on
or
off
setting and return
to
Standby
mode.
To set VOX sensitivity:
1.
Press the
Mode
button until the
VOX
icon
flashes and the current sensitivity level
is displayed.
The current sensitivity level is displayed
with letters “LE” and a Number 01
through 05, with Number 05 being the
most sensitive level and Number 01
being the least sensitive level.
2.
Press the
Channel Up
or
Channel Down
button to change the setting.
3.
Choose one of the following:
a.
Press the
Mode
button to enter
the selected setting and proceed to
other functions.
b.
Press the
Lock/Enter
button to
enter the selected setting and return
to
Standby
mode.
Mode Button
Mode Button
Channel Buttons
Channel Buttons
VOX Icon
VOX Sensitivity Level
Customer Assistance
Warranty
Introduction
13
Operation
12
Mode Functions
Operation
10 Memory Locations
•
Your microTALK radio has
10 Memory Locations
for storing
your most frequently used channels and channel/privacy code
combinations. These
Memory Locations
can be selected individually
or can be scanned. (See page 21 for memory location scan.)
To program a memory location:
1.
Press the
Mode
button until the
Memory
icon and the memory location
flash on the display.
2.
Press the
Channel Up
or
Channel Down
button to select the memory location
(0 through 9).
If a location has been programmed
before, its associated channel/privacy
code will be shown on the display.
3.
Press the
Lock/Enter
button to enter
a new memory location or edit an already
programmed memory location. The channel
numbers will flash on the display.
4.
Press the
Channel Up
or
Channel Down
button to select a channel (1 through 22).
5.
Press the
Lock/Enter
button.
The CTCSS icon and privacy code
numbers will flash on the display.
Mode Button
Channel Buttons
Memory Icon
Lock/Enter Button
Nothing
Comes Close to a Cobra
®
