Customer Assistance
Warranty
Introduction
Operation
10
Mode Functions
Operation
11
NOAA* All Hazards Radio Channels
•
You can use your microTALK radio to listen to
NOAA All Hazards
Radio
channels transmitting in your area.
To listen to All Hazards Radio channels:
1.
Press the
Mode
button until the
WX
(All
Hazards Radio) icon, the currently selected All
Hazards Radio channel, and signal strength
are displayed.
2.
Use the
Channel Up
or
Channel Down
button
to change All Hazards Radio channels.
3. WX
(All Hazards Radio) icon will continue to
be displayed when All Hazards Radio is
on
.
Choose one of the following:
a.
Press the
Mode
button to proceed
to other functions.
b.
Press the
Lock/Enter
button to exit
All
Hazards Radio
channels mode and return
to
Standby
mode.
*National Oceanographic and Atmospheric Administration
Set DCS Privacy Codes
•
To select a DCS privacy code:
1.
After selecting a channel, press the
Mode
button until the DCS icon appears and the
small numbers flash on the display
(01 through 104).
NOTE
If CTCSS is turned
on
at the channel
selected, the display will flash the
DCS icon and “OFF.” To switch from
CTCSS to DCS, press the
Channel Up
or
Channel Down
button while the
display is flashing “OFF.” The display
will then show the small numbers
flashing and you will then be able
to proceed to step 2.
2.
Press using the
Channel Up
or
Channel Down
button to select a DCS privacy code. You can
hold the
Up
or
Down
button for fast advance.
3.
When your desired DCS privacy code is
displayed, choose one of the following:
a.
Press the
Mode
button to enter the new
setting and proceed to other functions.
b.
Press the
Lock/Enter
button to enter the
new setting and return to
Standby
mode.
c.
Do not press any buttons for 15 seconds
to enter the new setting and return to
Standby
mode.
Mode Button
Channel Buttons
DCS Privacy Code
Mode Button
Channel Buttons
Hazards Radio Icon
Nothing
Comes Close to a Cobra
®
