DSC Operation
Standby Mode Signal
If you will be away from your radio or otherwise unable to answer calls,
you can put the radio into DSC Standby mode. When in DSC Standby mode,
your radio will log all calls received into its call waiting memory and respond
automatically to individual calls with an
UNATTENDED
message. You will
then be able to retrieve those calls from the call waiting memory.
NOTE
The call waiting memory can retain up to twenty calls.
See the following section for information on call waiting.
To enter Standby mode:
1. From Standby mode, press the Call/Set
button to enter the Call Send menu.
2. Use the Up/Down buttons to select
STANDBY
.
3. Press the Call/Set button to enter DSC Standby mode.
The radio will then remain in DSC Standby
mode until you exit from that mode.
To exit DSC Standby mode:
1. From DSC Standby mode, press the Call/Set
button to return the radio to Standby mode.
Call Log
The Call Log logs all DSC calls directed to
the radio. It captures the caller’s name, the type
of call and their position.
To review calls received while in DSC Standby mode:
1. From Standby mode, press the Call/Set
button to enter the Call Send menu.
2. Use the Up/Down buttons to select
CALL LOG
.
3. Press the Call/Set button to enter Call Log mode.
4. Use the Up/Down button to move from message to
message in the call log.
5. Press the Call/Set button to return to Standby mode.
Intro
Operation
Customer
Assistance
Warranty
Notice
Secondary Icons
Caution
Warning
Installation
Customer
Assistance
Operating Your Radio
Individual Directory
Transmit Position
Send/Exit
Standby Mode
DSC Operation
62 English
Nothing
comes close to a Cobra
®
63
Intro
Operation
Customer
Assistance
Warranty
Notice
Secondary Icons
Caution
Warning
Installation
Customer
Assistance
Operating Your Radio
Sending a Position Send
Position Send uses your connected GPS in similar fashion to the position
request function, except that you initiate the activity to let another station
know where you are.
To send a position send message:
1. In Standby mode, select a channel on which you want
to communicate.
2. Press the Call/Set button to enter the Call Send menu.
3. Use the Up/Down buttons to scroll to
POS SEND
(position send.)
4. Press the Call/Set button to enter the individual directory.
5. Use the Up/Down buttons to select the station
to which you want to send your position.
6. Press the Call/Set button to send your position.
After your position is sent, the LCD will show
POS SEND
(position send.) You will have two choices.
■
Resend your position to the same station.
■
Exit from Position Send mode.
a. To resend your position:
1) Use the Up/Down buttons to select
SEND
.
2) Press the Call/Set button to resend your position.
b. To exit from the position send mode:
1) Use the Up/Down buttons to select
EXIT
.
2) Press the Call/Set button to return to the
Call Send menu.
Receiving a Position Send
When another station sends you its position in
Position Send mode, the individual alarm will sound
and the station’s name and position will be shown
on the LCD. Press any button to turn off the alarm
and return to Standby mode.
Intro
Operation
Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution
Warning
Installation
Customer
Assistance
Standby Mode
Call Log
Standby Mode
DSC Standby Mode
Position Send
Position Send