DSC Set-Up
If You Incorrectly Enter Your MMSI Number
You CANNOT re-enter your number. A second attempt to enter
an MMSI number will result in an error message as shown.
Pressing the Call/Set button from the error message will
return the radio to the Settings menu.
Once the error message appears, the radio will still operate
in all non-DSC modes. But you will have to return the radio
to your local dealer for reset before you can enter your
MMSI number to use the radio in DSC mode.
Because the MMSI number is so important to DSC
operation, this limitation is imposed on all DSC capable
radios to prevent constant changes and the potential
introduction of errors in the process. If, for any reason,
it is necessary to change the MMSI number in the radio,
you can return it to your local dealer for reset.
If You Transfer Your Radio to a Different Vessel
Contact the MMSI issuing agency from which you obtained your number
and change the information associated with your number to correspond
to vessel in which it will be mounted.
To view your MMSI number at any time:
1. Enter the Settings menu and scroll to
USERMMSI
with the Up/Down buttons.
2. Press the Call/Set button and the blinking
cursor will appear at the first digit of your
already entered number under
USERMMSI
ID ENTRY
.
3. Press and hold the Call/Set button to
return to the Settings menu.
Intro
Operation
Customer
Assistance
Warranty
Notice
Secondary Icons
Caution
Warning
Installation
Customer
Assistance
Operating Your Radio
User MMSI ID Entry
Intro
Operation
Customer
Assistance
Warranty
Notice
Main Icons
Secondary Icons
Caution
Warning
Installation
Customer
Assistance
DSC Set-Up
46 English
Nothing
comes close to a Cobra
®
47
To enter your MMSI number:
1. Enter the Settings menu and scroll to
USERMMSI
with the Up/Down buttons.
2. Press the Call/Set button and the blinking cursor will
appear at the first digit under
USER MMSI ID ENTRY
.
3. Use the Up/Down buttons to scroll through the number
list to that digit of your number.
4. Press the Call/Set button to select the digit and the
blinking cursor will move to the next digit of the number.
5. Repeat steps 3 and 4 until all nine digits of your MMSI
number are entered.
NOTE
Press the High/Low Power button to backspace
and erase the last selected number.
6. Check that you have entered the number correctly.
7. Press the Call/Set button.
8. Repeat steps 3 through 6 to verify the number by
re-entering it.
9. Press and hold the Call/Set button to accept the
number and return to the Settings menu.
Intro
Operation
Customer
Assistance
Warranty
Notice
Secondary Icons
Caution
Warning
Installation
Customer
Assistance
Operating Your Radio
User MMSI ID Entry
User MMSI
Error Message
Call/Set Button
User MMSI