7 Using the SA32E
For operating convenience, it may be best to start scarifying at a point close to the power supply
and to work away from the supply. Use the tool at a right angle from the power supply and place
the power cable to side which has already been scarified.
Warning
：
When scarifying or aerating do
not allow the motor to labour particularly in
heavy conditions. When the motor labours
the speed of the motor drops and you will hear a change
in the motor sound, when this occurs stop operating,
release the switch lever and raise the height of cut.
Failure to do so could damage the machine.
NOTE: the motor is protected by a safety cut out which
is activated when the blade becomes jammed or if the
motor is overloaded. When this occurs, stop the
machine and remove the plug from the power supply.
The safety cut out will only reset when the switch lever
10 is released. Clear any obstruction and wait for a few
minutes for the safety cut out to reset before continuing
to working. At this time do not operate the switch lever 10 as this will prolong the reset time of the
safety cut out. If the mower cuts out again, increase the operating height to reduce the load on the
motor.
8.Technical Data
Electric Scarifier / Aearator
SA32E (LS-S3201)
Rated power
1400W
Operating width 32cm
Operating heights +3/-3/-6/-9mm
Collector capacity
40L
Weight
10kg
Protection class
/IPX4
Working speed of the aerator cylinder 3900 ±5
％
r/min
Sound power level
94dB(A)
Vibration
3.2m/s
2
