9
Fig.3A Fig.3B Fig.3C
Fig.3D Fig3E
5.3 FIT THE ISOLATOR KEY
1. Open the battery door. (Fig.4A)
2. Insert the isolator key into the slot. (Fig. 4B
)
Fig.4A Fig.4B
5.4 FIT THE BATTERIES
1. Open the battery door.
2. Make sure the isolator key is switched off. Switch mark
”1” is ON”, “0” is “OFF”. (Fig. 5A)
3. Insert the two battery packs into battery holder. (Fig. 5B/Fig.5C)
4. Make sure the latch on bottom of battery pack snaps in place and that battery pack is fully seated. (Fig. 5C)
5. Close the battery door. (Fig.5D)
Fig.5A Fig. 5B Fig. 5C