12
13
Nothing
Comes Close to a Cobra
®
Operation
Mode Functions
Operation
Customer Assistance Warranty
Introduction
Roger Beep Confirmation Tone
•
Your listener will hear an audible tone when you release the
Talk
button.
This alerts the other party that you are finished talking and it is OK for
them to speak.
To turn roger beep on or off:
1.
Press the
Mode/Power
button until the
Roger Beep
icon flashes. The current
on
or
off
setting is displayed.
2.
Press the
Channel
Up
or
Channel
Down
button
to select roger beep
on
or
off
.
3.
Choose one of the following:
a.
Press the
Mode/Power
button to enter the
new setting and proceed to other functions.
b.
Press
Talk
or
Call/Lock
button to enter the
new setting and return to
Standby
mode.
c.
Do not press any buttons for 15 seconds to enter
the new setting and return to
Standby
mode.
Roger Beep On
MEM
ESC
TRI
WATCH
SCAN
V
O
LUME
CALL
MODE
CHANNEL
Mode/Power
MEM
ESC
TRI
WATCH
SCAN
V
O
LUME
CALL
MODE
CHANNEL
H-M-L
Channel Button
Key Tone On/Off
•
When
Key Tone
is
On
, an audible tone will sound each time a button
is pressed.
To turn key tone on or off:
1.
Current key tone status On/Off will flash.
2.
Press the
Channel
Up
or
Channel
Down
button
to select key tone on or off.
3.
Choose one of the following:
a.
Press the
Mode/Power
button to enter the
new setting and proceed to other functions.
b.
Press
Talk
or
Call/Lock
button to enter the
new setting and return to
Standby
mode.
c.
Do not press any buttons for 15 seconds to enter
the new setting and return to
Standby
mode.
MEM
ESC
TRI
WATCH
SCAN
V
O
LUME
CALL
MODE
CHANNEL
Mode/Power
MEM
ESC
TRI
WATCH
SCAN
V
O
LUME
CALL
MODE
CHANNEL
H-M-L
Channel Button
Set High/Medium/Low (H-M-L) Power Button
•
Your radio can transmit selectively at 0.5, 1, or 2 watts of power Use
the low power setting for short-range communications and use the high
power setting for long-range communications.
To toggle between H-M-L Power Modes:
1.
Press the
H-M-L
button to select between High,
Medium and Low power settings. The
HI, MED
or
LO
icons will show on the display for the
selected level.
2.
When the desired power is selected, press the
Talk
button to enter the new setting and return to
Standby
mode.
MEM
ESC
TRI
WATCH
SCAN
H-M-L
V
O
LUME
CALL
MODE
CHANNEL
H-M-L Button
RX
Vox
HI MED LO WX
TW DCS Scan
CTCSS Mem
BURP Power Saver
Hi/Med/Lo Icon
Channel 8 through 14 only operates on
Low
power setting.
Talk Button
MEM
ESC
TRI
WATCH
SCAN
H-M-L
V
O
LUME
CALL
MODE
CHANNEL
CXT1035CAMO_MANL_vE.indd 13-14
2/28/14 9:55 AM
