22
On completion of gas conversion, replace gas type
identification label located at:-
- Rear of appliance, above gas connection.
- Beside the rating plate.
Before leaving the converted installation;
1. Check all gas connections for leakages using
soapy water or other gas detecting equipment.
2. Check the following functions in accordance
with operating instructions specified in the
'Operation' section of this manual.
Light Cooktop Open Burners.
(Standard / Flame Failure Option).
Check Cooktop Low Fire Burner operation.
Check Cooktop High Fire Burner operation.
Lighting the Griddle Burner operation
(If fitted).
Check Griddle Burner operation (If fitted).
Light Oven Main Burner.
Check Oven Low Fire Burner operation.
Check Oven High Fire Burner operation.
Ensure that all controls operate correctly.
Ensure that operating pressure remains
correct.
3. Ensure any adjustments done to components
that have adjustments / settings sealed (e.g.
paint sealed), these are re-sealed.
NOTE:
If it is not possible to get the appliance to
operate correctly, shut ‘Off’ the gas supply
and contact the supplier of this appliance.
D
O
NOT
USE
A
NAKED
FLAME
TO
CHECK
FOR
GAS
LEAKAGES
.
Summary of Contents for CR6 Series
Page 28: ......
