17
Fault
Possible Cause
Remedy
Piezo ignitor not sparking.
Short in high tension lead.
Piezo ignitor faulty.
Piezo electrode cracked or sooted
up.
Call service provider.
Call service provider.
Call service provider.
Pilot won’t light.
Knob on gas control valve won’t
go fully in.
No gas supply.
Gas pressure too low.
Blocked pilot injector.
Remove obstruction. Correct
control / control panel mounting.
Call service provider.
Call service provider.
Call service provider.
Call service provider.
Pilot flame small.
Gas pressure too low.
Pilot injector restricted / incorrect
size.
Call service provider.
Call service provider.
Pilot goes out when knob released. Releasing knob before thermocou-
ple is heated.
Pilot flame too small.
Thermocouple faulty.
Faulty gas control.
Hold control in for longer (10 s), see
if pilot will stay lit.
Call service provider.
Call service provider.
Call service provider.
Pilot flame yellow / lazy.
Gas pressure incorrect.
Restriction in pilot injector or
aeration.
Call service provider.
Call service provider.
Pilot goes out when main burner
comes on.
Incorrect gas pressure.
Faulty gas control.
Call service provider.
Call service provider.
Pilot goes out while oven is in use,
can re-light.
Gas supply - incorrect or
fluctuating pressure.
Thermocouple faulty.
Draught at installation (blowing
pilot out).
Call service provider.
Call service provider.
Move appliance to a draught free
area or remove cause of draught.
Main burner will not light.
Wrong size or blocked main
injector.
Small pilot flame.
Faulty gas control.
Incorrect supply pressure.
Call service provider.
Call service provider.
Call service provider.
Call service provider.
Main burner does not burn
correctly (Roars / lights back /
incorrect colour).
Incorrect supply pressure.
Main burner aeration incorrect.
Incorrect size or blocked main
injector.
Main burner faulty.
Check supply pressure.
Call service provider.
Call service provider.
Call service provider.
Oven
Summary of Contents for CR6 Series
Page 28: ......
