3
Peel the plastic film off of the suction cup.
Un-screw the angle locking knob and remove the
mounting screw. Be careful not to lose the metal nut
inside the angle locking knob.
Slide the mounting bracket onto the GPS receiver
and line up the square holes of the bracket with the
round holes on the rear of the receiver.
Insert the mounting screw and secure it with the
angle locking knob.
Rotate the suction cup locking knob to tighten or
loosen the ball joint.
To adjust the angle to the road, if necessary, loosen the
angle locking knob. Turn the camera so that it has a clear
view of the road ahead. Tighten the knob when done.
Press the Suction Cup firmly onto the windshield.
Push down on the lever to lock the suction cup
in place.
Plug the 12V DC power cord into the camera.
Plug the cigarette lighter adapter on the power
cord into your vehicle’s cigarette lighter.
Installation
•
Where to Mount Your Unit
You will get optimum performance from your camera if you
mount
it on the front
windshield, behind the rear-view mirror. This will minimize the impact on the driver’s
line of sight. You’ll also want to keep the camera centered and angle the bracket to
optimize the camera’s view of the road ahead.
Installation
Your Dash Cam
Windshield Mounting
