Cobra Helicopter Goblin 500, Manual

Page: 12 / 40

5mm
5mm
Set Screw
M4x4mm
(HC152-S)
Flat Head Cap Screw
M3x5mm
(HC132-S)
18T Pulley
(H0215-18-S)
(See page 19 for additional
pulleys available)
Set Screw M4x15mm
Socket Head Cap Screw
M2.5x8mm
(HC020-S)
Washer 4.3x 11x1mm
(HC184-S)
Metric Hex Nylon Nut M4H5
(HC212-S)
Spring de 5 / df 0.3 / LL6
(HC316-S)
Washer 4.3x 11x1mm
Socket Head Cap Screw M2.5x8mm
Finishing Washer M2.5
Metric Hex Nylon Nut M4 H5
Note:
To maximize space for the batteries, it is advisable
to shorten the motor shaft.
Follow the dimensions given in this drawing.
For the cut, you can use an electric tool like a
“Dremel” with a cut-off disc.
Additionally, ensure the motor shaft has an
appropriate 'flat' for one of the set screws.
Motor Support
(H0211-S)
Set Screw M4x15mm
(HC154-S)
Finishing Washer
M2.5
(H0255-S)
Set Screw M4x4mm
Flat Head Cap Screw M3x5mm
....x2
....x4
....x2
....x2
....x2
....x2
....x2
Bushing 5x 6x18mm
(H0266-S)
(Needed with 5 mm motor shaft)
23
m
m
Socket Head Cap Screw
M2.5x8mm
(HC020-S)
Spring
de 3 / df 0.53 / LL35
(HC311-S)
Note:
Recommended
motor wiring
orientation
Copyright@2013 - SAB Heli Division - All rights reserved
Page 10
Chapter 5, Motor Assembly