background image

M o d e l   Y e a r   2 0 1 4                                                                                                                                                                                                     p a g e  24

M a v e r i c k   B o a t   C o m p a n y ,   I n c .     •   3 2 0 7   I n d u s t r i a l   2 9 t h   S t .   •   F o r t   P i e r c e ,  

F l o r i d a   3 4 9 4 6   •   ( 7 7 2 ) - 4 6 5 - 0 6 3 1   o r   ( 8 8 8 ) - s h a l l o w   •   F a x :   ( 7 7 2 )   4 8 9 - 2 1 6 8

WATER SYSTEM

Fresh Water System

The fresh water tank on your 296 CC can be filled at the cap labeled “WATER” on the starboard deck gunnel. To pressurize 
the system, flip the switch labeled “FRESH WASH DOWN” on the switch panel at the helm. You can leave this switch in the 
ON position while the boat is in use. The pump has an internal pressure switch that allows the pump to turn on and off as 
needed. This model has a 20 gallon fresh water tank. 

In the colder months of the year, it’s advisable to drain the fresh water system and winterize by adding a non-toxic antifreeze 
to the system. Run the antifreeze throughout the system by opening shower nozzle until antifreeze is delivered through the 
shower head.

Water System Diagram

Water Fill 

aTHis 
is  a is 

aTHis 

Summary of Contents for 296 CC 2014









































Reviews: