Operation – SAILOR 6004 Control Panel
12
Chapter 2: Operation
98-137261-F
To set up filters for stations do as follows:
1. From any list of messages (
Unread
,
Tagged
or
All
), tap the menu icon and
then
Filters
.
2. Tap
Printer
,
Display
or
INS
to select the output for this filter.
3. For automatic filtering select
Automatic Mode
.
The coast stations within the currently set range are displayed.
1
4. For manual selection deselect
Automatic Mode
and tap the frequency you
want to set up a filter for, e.g.
490 kHz Stations
.
Swipe and select the stations you want to receive on this frequency.
5. Tap
Apply
. The selected stations are displayed directly below the frequency.
To change the
Range
and select Stations in
Automatic Mode
, do as follows:
1. From any list of messages (
Unread
,
Tagged
or
All
), tap the menu icon, and
then
Settings
. The tab
Automatic Mode
is accessible.
2. Tap the field
Range
.
3. Swipe until the desired range (min. 50Nm) in Nautical Miles and tap
Apply
.
4. To include specific stations in Nav Areas, swipe and tap the respective Nav
Area.
5. Swipe and select or deselect the stations to be included in Automatic Mode.
Figure 11: Filters for stations
1. For Automatic Mode the SAILOR 6390 Navtex Receiver must have a valid
GNSS input. Without a valid GNSS input it can only filter manually.
Note
Make sure that the stations for
Printer
are also included in the
stations for
Display
. If not, SAR, Nav or Met warnings sent only to
the Printer cannot be displayed and read.
Summary of Contents for Sailor 6390 Navtex
Page 1: ...SAILOR 6390 Navtex Receiver User Manual ...
Page 2: ......
