COBHAM SAILOR 6000B, User Manual

Page: 44 / 82

Chapter 2: Operation
34 Scan frequencies
To add a frequency to the list
1. From the
SCAN LIST
page, select the field where you want to add a
frequency. For example, select
Manual frequencies
to add
frequencies manually.
The manual frequencies are listed.
2. Select
New
at the bottom.
3. Type in the
Receive
and
Transmit
frequencies or select from the list of
Coast stations
.
4. Select OK .
5. To stop editing the scan list, select OK again.
Note You must always enter a transmit frequency, even if it is not
used (e.g. for NAVTEX, which is receive only). The transmit
frequency must be within a valid maritime frequency band
specified by ITU. The receive frequency must be between 490
and 27500 kHz.