COBHAM SAILOR 6000B, User Manual

Page: 34 / 82

Chapter 2: Operation
24 Messages
•
Load a file
by selecting
Options
>
Load
and select a file to load
into the editor. You can then edit the text before you save it or send
it. Note that you cannot load a file if it contains characters that are
not telex characters.
Supported characters are
: a b c d e f g h i j k l m n o p q r s t u v w x y
z 0 1 2 3 4 5 6 7 8 9 - ? : ( ) . , ' = / +
4. When the message is complete, you can either send the message (skip
the next steps and go directly to step 8) or save it for later use.
5. To save the message, select
Options > Save
. You can save it to the
Message Terminal or to a USB memory stick.
6. Select Print if you want to print the message on your connected
printer.
7. If you want to clear the editor and start a new message, select New .
8. To send the file as it is, select Send text at the bottom of the page.