Calibration
98-148248-A
Chapter 6: Configuration
6-9
Confi
guration
Automatic azimuth calibration with an active satellite profile
You can enable automatic azimuth calibration, even if there is no line of sight to an azimuth
calibration satellite from the place of installation. To be able to use this feature you must
have made a valid satellite profile and activate it. When the vessel leaves the harbour and
gets line of sight to the calibration satellite, the system automatically finds and tracks the
satellite and makes the azimuth calibration. After a successful azimuth calibration the ACU
will automatically disable the
Azimuth calibration (active satellite profile)
on the
page
SERVICE > Calibration
.
1. Create a modem profile, see
2. Create a satellite profile, see
3. Click
SETTINGS
and
Activate
the satellite profile.
4. Click
SERVICE > Calibration
.
5. Select
Enable
in the section
Azimuth calibration
(active satellite profile). To be able
to use this feature you must have made a valid satellite profile and activate it.
8
Invalid satellite, e.g. satellite not visible.
9
Unknown error
Error code
Explanation
Table 6-4: Possible error codes during calibration (Continued)
Figure 6-7: Web interface: SERVICE, Calibration
SAILOR600Ka-IM-98-148248.book Page 9 Monday, November 23, 2015 1:36 PM
