150-843708 Rev. A
Page 7 of 12
Edit Page
The Edit Page allows you to edit the Manual channel
as well as make limited preset channel changes.
Below is an example of the Edit Page for the
Manual channel. For Preset Channels, only the
Tones and Transmit Power can be changed during
Edit Mode.
Channel Tuning
CHANNEL NUMBER BY CURSOR/VALUE
Cursor
Rotate the Cursor (right outer) Knob
until the underline character is
below the ones digit of the channel
number.
Rotate the Value (right inner) Knob
until the desired channel is
displayed.
CHANNEL NUMBER BY KEYPAD ENTRY
Press
Press the ENTER button.
Then key in the channel number 1 to
350 (700 for units with SW 11).
NOTE:
If you enter an invalid
channel, your input will be cleared
and you can try again.
Press to exit keypad entry mode.
ENTER
PUSH
ENTER
Channel Number
Direct Indicator
Receive Frequency
Frequency Modulation
Receive Tone
Transmit Tone
Transmit Frequency
Transmit Power
Bandwidth
Press so the display appears as below.
Page 10
Page 11
These commodities, technology or software are controlled in accordance with the United States Export Administration Regulations, Export Classification
Control Number(ECCN) EAR99. When exporting, diversion contrary to U.S. law is prohibited.
