Cobham Wireless
-
Coverage
BSF0060 User Handbook
www.cobham.com/wireless
Document number: BSF0060HBK
Issue number: 5
Date: 14/05/2018
Page 40 of 43
6.5.2.
Configuring and Testing the Relay
This section describes how to set the relay activation and how to test the Relay function.
Note!
The relay status is not affected by the login / logout alarm parameters.
For installation testing purposes, it is possible to test the open / close function of the relay. This test
procedure makes sure the relay is closed for 3 seconds, then opens for 10 seconds, and finally closes
for 3 seconds before going back to original state.
1.
In the RMC Main window, select the Configuration window option. The Relay configuration
options are located at the bottom of the screen.
2.
The relay can be set to close or open to indicate an alarm. This can be changed by changing
the polarity.
Click to test
Set trigger for relay
6.6. TCP/IP Communication Configuration – for Remote Monitoring
A TCP/IP communication is run over a company’s network. Therefore each company needs to define
the details regarding the configuration, IP addresses, etc.
Note!
For more information please refer to the document “Common Commands and Attributes”,
(available from Cobham Wireless) section 12, Network and USB Configurations.
1.
Select Configuration and choose Communication. The following window appears.
