Cobham Wireless
-
Coverage
BSF0060 User Handbook
www.cobham.com/wireless
Document number: BSF0060HBK
Issue number: 5
Date: 14/05/2018
Page 34 of 43
6.
Initial Setup
Note!
These are General instructions and the illustrations may not portray the specific repeater type.
The initial setup consists of the following procedures:
●
Opening an RMC Session
●
Assigning the Repeater general parameters: Name and clock
●
Configuring the RF
6.1. Opening an RMC Session
1.
Install the RMC application supplied on the Setup CD, on the computer used to open the
session to the Repeater.
2.
Connect the RS232 cable between the computer and the LMT/Ethernet port on the control
module on the front panel of the repeater shelf
3.
Run the application on your computer.
4.
Select Serial cable Connection Type.
5.
Click Next. The following dialog appears.
6.
Select the COM port corresponding to the communication port on your computer to which the
RS232 cable is connected and click Connect.
