COBHAM AVIATOR 200 User Manual Download

Page: 12 / 126

Chapter 1: Introduction

Your AVIATOR Wireless Handset

TFT screen, a graphical user interface provides easy access to all functions
including contacts and settings. The user interface also provides direct
access to certain features of a connected SwiftBroadband unit.

You can make secure calls to all IP phones complying with the ZRTP version
used by the AVIATOR Wireless Handset.

The AVIATOR Wireless Handset

The AVIATOR Wireless
Handset connects to a
wireless access point using
Wireless Local Area
Networking (WLAN).

The internal battery is charged
from the dedicated cradle.

Due to the improved power
management the AVIATOR
Wireless Handset can be on
stand-by time for up to 24
hours.

The AVIATOR Wireless Handset & Cradle includes the following main units:

• TT-5624B AVIATOR Wireless Handset
• TT-5626B Cradle for AVIATOR Wireless Handset

Summary of Contents for AVIATOR 200































































































































Search results

Summary of Contents for AVIATOR 200

Reviews:

Related manuals for AVIATOR 200

Brands by name

Popular brands

COBHAM AVIATOR 200, User Manual

Search results

Summary of Contents for AVIATOR 200

Reviews:

Related manuals for AVIATOR 200

Brands by name

Popular brands