7
7.3.
Initialization
Send “begin+password” in SMS to the unit, it will reply “begin ok” and initialize all the
settings. (Default password: 123456)
For example, send SMS
“
begin123456
”
to the tracker , If succeeded,
tracker will reply
“
begin ok”.
7.4.
Change the password
7.4.1 Set Password: Send sms: “pold pspace+new password” to the unit to
change the password.
For example, send sms: “password123456 888888” to terminal device, it will reply sms:
“password OK”. New password 888888 changed in success.
7.4.2 Be sure keep the new password in mind, you have to upload the software to restore the
original setting in case of losing the new password.
7.4.3 Make sure the new password is in 6 digits Arabic numbers, or the tracker cannot
recognize the password.
7.4.4 When reading this user manual, you will notice that we have used "+" and "space"
between some words;"+" between two words means they should be written together as
one word and "space" between two words means you should leave one character space
between two words.
7.5.
Authorization
You have to save your phone number as authorized user to be able to use certain
functions as movement alerts, sos alerts and reports. You can authorize up to 5 numbers.
Authorization can be done in two different ways
7.5.1 Call and track the tracker device for 10 times from cell phone in success, it will make the
cell phone number as the authorized number automatically
7.5.2 Authorization: Send SMS “admin+pspace+cell phone number” to set up an
authorized number, the other authorized numbers should be set by the first authorized
number, if the number is successfully authorized, the unit will reply“admin OK” by SMS.
7.5.3 Delete authorization: Send SMS “pspace+authorized number” to
delete the authorized number.
7.5.4 If you want to track the target tracker device when it enters into another country, you
must add the country code before the cell phone number, for example, send SMS
“admin123456 008613322221111” to the device. Note: 13322221111 will be set up as the
authorized number.
