background image

BT-Q810

 Bluetooth GPS Receiver 

                       

BT-Q810 Quick Installation Guide 

 
Thank you for purchasing Qstarz BT-Q810 32-Channel Bluetooth GPS Receiver. It provides 25 hours of 
navigation and supports Smart Power control for power saving. 

 

Main features: 

z

 

Adopt MTK chipset with high sensitivity to -158dBm 

z

 

Up to 25hrs operating time for GPS navigation 

z

 

32-Channel all-in-view tracking for fast acquisition and reacquisition 

z

 

Fast Position Fix ,Cold start 39s, Warn start 36s,Hot start 1s 

z

 

Vehicle tracking & Location base services 

z

 

Smart power control – Auto On-Off function 

z

 

Compatible with Bluetooth Serial Port Profile (SPP) in 10m wirelessly 

 
A. Standard Package 

GPS Unit BT-Q810 (1) + Lithium-ION Rechargeable Battery (2) + Cigarette Adapter (3) + Travel Charger (4) + Warranty Card + Quick 
Installation Guide. 

(* Travel Charger plug type might be adjusted according to corresponding countries.)

 

 

1.                                              2.                                      3.                                                  4. 

   

     

               

     

 
B. Appearance 

1.    Power jack (mini USB type)   
2.  Power switch  
3.    Battery status LED (Red/Green)   
4.    Bluetooth status LED (Blue)   
5.    GPS status LED (Orange)   
6.  Internal antenna  
 

   
 
C. Battery installation

 

C-1 Put Battery in place:

  Press the 

PUSH

 button on the bottom side of the unit (1) and pull out the battery cover. Insert battery in the 

unit (2) and put battery cover on to the cabinet (3), then push down and force it forward to fit firmly (4). 
 
                          1.                                                        2.                                                            3.                                                            4. 

         

     

     

 

 
C-2 Take Battery out:

  Press the 

PUSH

 button on the bottom side of the unit (1) and pull out the battery cover (2). Then take out the 

battery from the unit (3).   

 

                    1.                                                              2.                                                            3.                                                                       

           

     

 

 
D. Charging your battery 

 
 
 

 

       

 
 

 

1

For the first time using the BT-Q810, please charge battery until it is fully 
charged. Take the power cable and connect it to the power jack (mini USB 
type) and recharge through travel charger or car cigarette adaptor. This will 
begin to charge the battery. Charging time is 3 hours typically. 

 
- When the Power LED is Red, battery power is low status. Please recharge. 
- When the Power LED is Green, the battery is under charging mode. 
- When the Power LED is blinking, the battery is fully charged.

 

1

Reviews: