background image

                                                                 

                                                                             

                                                                                                                                                         

     

14 

 

                                                                                               

movement  (the  default  distance  is  200m),  it  will  send  SMS  “Move+  latitude  &  longitude”  to  the 

authorized numbers at interval of 3 minutes. 

5.25.2 Cancel: Send SMS “password” to deactivate the movement alarm. 

5.26 Over speed alarm 

5

.26.1 Set up: Send SMS “speed+pspace+080” to  the unit (suppose the speed  is 80km/h), 

and  it  will  reply  “speed  OK!”.  When  the  target  moves  exceeding  80km/h,  the  unit  will  send  SMS 

“speed+080!+ latitude & longitude” to the authorized numbers at interval of 3 minutes. 

5.26.2 Cancel: Send SMS “password” to deactivate the overspeed alarm. 

Remark:  The  recommended  speed  should  be  not  less  than  50km/h.  For  below  that  rate,  it  will  be 

effected the accuracy by GPS signals drift etc. 

5.27 Low battery alert 

5.27.1 Send SMS “lowpspace+on”, it will send SMS “low 

latitude/longitude” to authorized numbers 2 times in total in 15 minutes interval when 

voltage of battery is going to be about 3.55V. 

5.27.2 This function activates by default, send SMS “lowpspace+off” to deactivate. 

5.28.GPS blind Spot alert 

This function deactivates by default, send SMS “gppspace+on”, it will send alert 

SMS “no gps+last valid latitude/longitude before lost signal” to authorized phone numbers. 

Send SMS “gppspace+off” to deactivate. 

5.29 Sleep Mode   

5.29.1 Sleep by time   

Send "sleep+pspace+time", tracker will reply "sleep time ok" if none of the alarms/alerts 

has been set and no operations in 5 minutes, tracker will fall asleep, GPS module shut off, and LED 

will be off too. Calling or SMS can awake the tracker. If alarms have been set, tracker will enter 

sleep by detecting shock sensor. (Default mode) 

Summary of Contents for GPS302




















Reviews: