13
5.23.2 Cancel: Send SMS:” nospassword” to deactivate this function.
5.24. Multi-area management
5.24.1 Set Area
Send SMS command "area+pspace+latitude,lospace+areaname,distanceM" to
tracker(distance unit: M for meter, K for kilometer), it will reply "area01 ok".
Fox example: Send "area123456 22.353648,113.543678 school,800M".
Note: 5 areas at most and the distance between two points can't be less than the total distance in the 2
commands, and different areas can't cover each other.
5.24.2. Delete areas
Send SMS command:"pspace+area name", tracker will reply:"noarea ok".
5.24.3 Rename and set distance
Send SMS command "pspace+old name;new name, distanceM" to tracker, if name
is not repeated and area doesn't cover others, it will reply "rename ok!" for successful configuration.
Example: Send" rename123456 Area01;school,800M "
it means the new area name is "school", and covers area of a radius of 800 meters.
5.24.4 Activate multi-area management
Send SMS command "area+pspace+on" to tracker, it will reply "Area on ok!", when tracker
enter the pre set area, it will send SMS "area name+latitude & longitude" to all the authorized phone
number, and send same SMS when goes out of the area.
5.24.5 Deactivate Multi-area management
Send SMS command "area+pspace+off" to tracker, it will reply"area off ok!"
5.25 Movement alarm
5.25.1. Set up: when the unit stays immobile in a place for 3-10 minutes with GPS signal reception,
the user can send SMS“move+pspace+0200” to the tracker (Suppose area of a radius of 200
meters, it supports 4 digits at most. Unit: Meter). It will reply “move OK”. In case of such a
