27
7.57 Set up monitor center number
7.57.1 Setup: send command “cepspace+number” to tracker, it will reply“center num ok”. After
setup monitor center number, the messages of auto track by sms will be set to this center number, if all alarms
need to be sent to this number too, then this center number must be setup as authorized number.
7.57.2 Cancel: Send “nocepassword” to tracker, it will reply “no center num ok”
7.58 Web platform and PC installation tracking software user manual
7.58.1 Web based platform www.gpstrackerxy.com. Configuration IP: 202.104.150.75 Port: 9000. Please check
“software platform user manual” included in the CD for detailed operation information.
7.1.2
PC based installation tracking software user manual included in the CD in package.
8.
Cautions
Please comply with the instructions to extend the unit life:
1. Keep the unit dry. Any liquid, i.e. rain, moisture, may destroy or damage the inside circuitry.
2. Don’t use & store the unit in dusty places.
3. Don’t put the unit in overheated or overcooled places.
4. Handle carefully. Don’t vibrate or shake it violently.
5. Clear the unit with a piece of dry cloth. Don’t clean in chemicals, detergent.
6. Don’t paint the unit, this may cause some foreign materials left in between the parts.
7. Don’t disassemble or refit the unit.
8. Please read the user manual carefully before installation and operation, learn something more about the voltage range.
Otherwise, it won’t work properly or destroy the product.
Please check “software platform user manual” included in the CD for detailed operation information.
9.
Faults & solutions
Faults
Solutions
Startup Fail
Please check out the power wiring in correct place.
Call Fail
Check the GSM antenna connected. Check whether
the SIM card in place. Check whether the normal power supply voltage
No GPS signal
Check the GPS antenna connected.
SMS reply fail
Check the password and the sms commands.
Hang up Fail
In existence of an authorized number, an unauthorized number dials up the unit.
Please initialize the unit and re-set up the authorized numbers.
Stop engine fail
Check the relay for engine cut is right connected.
