Cobalt Digital Inc CS23, Owner'S Manual

Page: 89 / 136

CS23 Owner’s Manual 3
-
29
O
PERATING
I
NFORMATION
Zero Off is developed to provide an outstanding
“feel” of the pull and a pull that is in synch with the
skier’s needs while skiing a course.
Zero Off automatically starts when the boat’s
ignition switch is turned ON. Zero Off starts in the
same configuration in which it was turned off,
provided the battery was not disconnected. This
means the same configuration settings for boat
speed and setup selections are retained for the
next operating session provided the battery was not
disconnected. If the battery was disconnected,
Zero Off starts in default mode.
While bringing the boat up to speed to the point
where the Zero Off speed control engages, you can
manipulate the throttle as desired to pull the skier
up and line the boat up for entry to the course. The
Zero Off system beeps to acknowledge the point of
engagement. Once the boat has achieved the
target speed, it is very important to ensure that the
throttle handle is pushed all the way forward.
Failure to advance the throttle to the full open
setting while running the course may result in slow
times since throttle handle position provides an
upper limit on how much torque the engine is
allowed to produce. A wide-open throttle handle
position frees up the engine to produce its
maximum torque output and allows the speed
control to operate at its optimum level.
Using the Faceplate Buttons
Use the four buttons, SELECT, ON/OFF MENU,
and the DOWN and UP arrow keys to move around
the screen and modify parameters.
Refer to the Quick Start Guide or Zero Off Manual
found in your owner’s bag for more detailed
information about each menu option.
NOTICE: Zero Off must have a
satisfactory GPS fix to operate
in speed control mode, which
usually occurs within 5-10
seconds after turning on the
ignition.
Button Action Description
SELECT
Tap On the screens, it moves around the screen and highlights
areas that can be modified.
On the main menu, it moves to the next option.
UP or DOWN
Tap On the screens, it modifies the value that has been
highlighted.
On the main menu, it selects an option.
ON/OFF MENU
Tap Turns Zero Off on or off.
Hold Displays the main menu at the top of any screen.
The button actions are:
Tap – press and release the button in less than 1 second.
Hold – press and hold the button approximately 2 seconds.