BBG1022FS-OM (V1.4)
BBG-1022-FS PRODUCT MANUAL
3-47
Setup/Operating Instructions
BBG-1022-FS Function Menu List and Descriptions
Wings Insertion
Provides wings insertion/width controls and displays
insertion status.
• Wings Source Control
Selects the SDI input video port to serve as the device’s wings source.
Note: SDI inputs selected must be used with Rear I/O Module
correspondingly equipped with intended input ports.
• Wings Insertion Enable Control
Enables or disables wings insertion into the output video.
Note: For conditions where wings is not intended to be inserted, make
certain this control is set to Disabled.
• Wings Manual Width Control
When Manual is selected above, allows symmetrical L/R wings insertion
width, from none to widths extending into active image area if desired.
(0 to 300 pixel range; null = 0)
• Wings Status Displays
Displays wings timing status (on both Wings tab and Card Status
displays) as described below.
Note: • Wings timing is a function of the wings frame sync card/
device. Ideal wings timing is within 0 to 200 samples early
of output video timing. Wings timing cannot be controlled on
host device wings inserter.
• Error in wings timing will result in loss of wings (however,
program video image will not be corrupted).
Table 3-1
BBG-1022-FS Function Menu List — continued
Wings insertion within target 0-200 samples early
Wings insertion late
Wings insertion too early
Wings video wrong/mismatched format