3
BBG-1002-UDX-FS Function Menu List and Descriptions
3-58
BBG-1002-UDX-FS PRODUCT MANUAL
BBG-1002-UDX-FS-OM (V1.0)
Presets
Allows user control settings to be saved in a Preset and
then loaded (recalled) as desired, and provides a
one-button restore of factory default settings.
• Preset Layer Select
• Preset Enter/Save/Delete
Locks and unlocks editing of presets to prevent accidental overwrite as
follows:
• Protect (ready): This state awaits Protected and allows preset Save/
Delete button to save or delete current device settings to the selected
preset. Use this setting when writing or editing a preset.
• Protected: Toggle to this setting to lock down all presets from being
inadvertently re-saved or deleted. Use this setting when all presets
are as intended.
• Create New Preset: Field for entering user-defined name for the preset
being saved (in this example, “IRD Rcv122”).
• Save: Saves the current device settings under the preset name defined
above.
• Preset Save/Load Controls
Table 3-2
BBG-1002-UDX-FS Function Menu List — continued
Allows selecting a functional layer (or “area of concern”) that the preset is concerned with. Limiting presets to a layer or area of
concern allows for highly specific presets, and masks changing card settings in areas outside of the layer or area of concern.
Default All setting will “look” at all card settings and save all settings to the defined preset with no masking.
Selecting a layer (in the example, “In Audio
Routing”) will set the preset to only “look at” and
“touch” audio routing settings and save these
settings under the preset. When the preset is loaded
(recalled), the card will only “touch” the audio routing
layer.
Example: Since EAS audio routing can be
considered independent of video proc settings, if
normal audio routing was set up with a particular
video proc setting in effect, and at a later time EAS audio routing is desired to be saved and invoked as a preset, selecting
In Audio Routing here tells the preset save and load to not concern itself with video proc settings. In this manner, any video proc
settings in effect when the EAS preset is invoked will not affect any video proc settings that might be currently in effect.
Protected state –
changes locked out
Ready (open) state –
changes can be applied
• Select Preset: drop-down allows a preset saved above to be
selected to be loaded or deleted (in this example, custom
preset “IRD Rcv122”).
• Load Selected Preset button allows loading (recalling) the
selected preset. When this button is pressed, the changes
called out in the preset are immediately applied.
• Delete Selected Preset button deletes the currently selected
preset.
• Load Factory Defaults button allows loading (recalling) the
factory default preset. When this button is pressed, the
changes called out in the preset are immediately applied.
Note: Load Factory Defaults functions with no masking. The
Preset Layer Select controls have no effect on this
control and will reset all layers to factory default.
• Download Presets saving the preset files to a folder on the
connected computer.
•
•
•