manualshive.com logo in svg

Cobalt Digital Inc BBG-1002-UDX-FS, Product Manual, Page: 3 / 110

Share
Download
Cobalt Digital Inc BBG-1002-UDX-FS Product Manual Download Page 3

BBG-1002-UDX-FS-OM (V1.0)

BBG-1002-UDX-FS PRODUCT MANUAL 

i

Table of Contents

Chapter 1

Introduction  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  1-1

Overview ............................................................................................................................. 1-1

Cobalt Reference Guides ..................................................................................................... 1-1

Manual Conventions............................................................................................................ 1-2

Warnings, Cautions, and Notes ..............................................................................  1-3

Labeling Symbol Definitions .................................................................................  1-3

Safety and Regulatory Summary ......................................................................................... 1-4

Warnings.................................................................................................................  1-4

Cautions ..................................................................................................................  1-4

EMC Compliance Per Market ................................................................................  1-4

BBG-1002-UDX-FS Functional Description ...................................................................... 1-5

BBG-1002-UDX-FS Input/Output Formats ...........................................................  1-5

Video Processor Description ..................................................................................  1-7

Audio Processor Description ................................................................................  1-11

Control and Data Input/Output Interfaces ............................................................  1-13

Alarm Function.....................................................................................................  1-14

User Control Interface ..........................................................................................  1-14

Technical Specifications.................................................................................................... 1-15

Warranty and Service Information .................................................................................... 1-19

Cobalt Digital Inc. Limited Warranty ..................................................................  1-19

Contact Cobalt Digital Inc. ................................................................................................ 1-20

Chapter 2

Installation  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  2-1

Overview ............................................................................................................................. 2-1

Installing the BBG-1002-UDX-FS ...................................................................................... 2-1

Installing Using BBG-1000-TRAY Optional Mounting Tray ...............................  2-1

BBG-1002-UDX-FS Unit Dimensions...................................................................  2-2

Rear Panel Connections....................................................................................................... 2-2

GPIO, Serial (COMM), and Analog Audio Connections.................................................... 2-5

Chapter 3

Operating Instructions. . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .  3-1

Overview ............................................................................................................................. 3-1

BBG-1002-UDX-FS Front Panel Display and Menu-Accessed Control ............................ 3-1

Connecting BBG-1002 To Your Network........................................................................... 3-3

Finding a BBG-1002 Device in DashBoard ...........................................................  3-4

Control and Display Descriptions........................................................................................ 3-4

Function Menu/Parameter Overview .....................................................................  3-5

Web User Interface.................................................................................................  3-6

Display Theme........................................................................................................  3-7

Checking BBG-1002-UDX-FS Device Information ........................................................... 3-8

Ancillary Data Line Number Locations and Ranges........................................................... 3-9

Summary of Contents for BBG-1002-UDX-FS















































































































Reviews:

No comments