9902-2UDXDI-OM (V1.0)
9902-2UDX-DI PRODUCT MANUAL
3-33
Operating Instructions
9902-2UDX-DI Function Menu List and Descriptions
(continued)
Note: •
AES Out Ch 2 and other channels have controls identical to the Source, Gain, Mute, and Invert controls described
here for AES Out Ch 1. Therefore, only the AES Out Ch 1 controls are shown here.
•
For each channel, its source and destination should be considered and appropriately set. Unused destination
channels should be set to the Silence selection.
• AES Output Channel Source
Using the Source drop-down list, selects the audio input source to be
routed to the corresponding AES output channel from the following
choices:
• Card Audio Bus Ch 1 thru Ch 16 (Path 1 or 2)
• Built-in Tone generators Tone n
(-20 dBFS level tone generators with n being frequencies of 100, 200,
300, 400, 500, 600, 700, 800, 900, 1k, 2k, 4k, 6k, 8k, 12k, and 16k)
• Flex Bus A thru P mixer sum node outputs
• Silence
•
Audio LTC (Path1 or 2)
• Downmixer L (Path1 or 2)
• Downmixer R (Path1 or 2)
• Channel Mute/Phase Invert/Gain Controls
and Peak Level Display
Provides Mute and phase Invert channel controls, as well as peak level
meter for each output channel. (Meter shows level as affected by Level
control.)
Gain controls allow relative gain (in dB) control for the corresponding
destination AES output channel.
(-80 to +20 dB range in 1.0 dB steps; unity = 0 dB)
Note: Although the 9902-2UDX-DI can pass non-PCM data such as
Dolby
®
E or AC-3, setting the gain control to any setting other than
default 0 will corrupt Dolby data.
Table 3-2
9902-2UDX-DI Function Menu List — continued
Summary of Contents for 9902-2UDX-DI
Page 107: ......