9902-2UDXDI-OM (V1.0)
9902-2UDX-DI PRODUCT MANUAL
3-21
Operating Instructions
9902-2UDX-DI Function Menu List and Descriptions
(continued)
Note: •
Default factory preset routing routes embedded Ch 1 thru Ch 16 to bus channels Audio Bus Ch 1 thru Ch 16.
•
Bus Ch 2 thru Bus Ch 16 have controls identical to the controls described here for Bus Ch 1. Therefore, only the
Bus Ch 1 controls are shown here.
• Bus Channel Source
Using the Source drop-down list, selects the audio input source to be
routed to the card bus channel from the following choices:
• Embedded input channel 1 thru 16 (Emb Ch 1 thru Emb Ch 16)
• Input Flex Bus summed mix output nodes A thru P (see Input Flex Mix
(p. 3-23)
Note: Embedded channel sources are only the embedded channels
associated with the respective path.
• Channel Mute/Phase Invert/Gain Controls
and Peak Level Display
Provides Mute and phase Invert channel controls, as well as peak level
meter for each output channel. (Meter shows level as affected by Level
control.)
Gain controls allow relative gain (in dB) control for the corresponding
destination Embedded Audio Group channel.
(-80 to +20 dB range in 1.0 dB steps; unity = 0 dB)
Note: Although the card can pass non-PCM data such as Dolby
®
E or
AC-3, setting the gain control to any setting other than default 0 will
corrupt Dolby data.
Audio Delay – Provides bulk (all four groups/master) and individual
card audio bus channel delay offset controls and delay parametric
displays.
• Bulk (Master) Audio/Video Delay Control
Bulk Delay control adds bulk (all four groups) audio delay from any video
delay (net audio delay offset setting adds delay in addition to any delay
included by other actions). This control is useful for correcting lip sync
problems when video and audio paths in the chain experience differing
overall delays. (-33 to +3000 msec range in 0.01-msec steps; null =
0 msec).
Table 3-2
9902-2UDX-DI Function Menu List — continued
• • •
Summary of Contents for 9902-2UDX-DI
Page 107: ......