Cobalt_OM_preprint_shell.fm Page 2 Wednesday, March 1, 2006 5:39 AM
3
-
26
46 Owner’s Manual
COBALT
46
Y
ACHT
S
ECTION
3
The AC portion of the E-Plex system receives AC
power from the shore power cable or generator.
The panel distributes AC power through main
circuit breakers.
AC electricity operates the equipment displayed on
the cabin 10" display.
Amperage is displayed digitally on the 10" display.
This allows you to check for proper voltage and
polarity immediately after making the shore power
cable connection. The reversed polarity light
indicates if the polarity of the shore power has been
reversed.
Battery Switches
There are three Battery switches and two
Emergency Parallel Switches. The House battery
switch is located port forward in the engine room.
The engine battery switches and Emergency
Parallel Switches are located in the forward battery
compartment below the floorboard between the
engines. For operation in “Automatic” mode, the
battery switch must be turned to “OFF” first, then
into “Automatic.” These switches are normally
operated by E-Plex at the dash or on cabin 10"
display but they can also be operated manually by
turning the red switch on top.
Shore Power Connection
1 – Shore power cord
2 – Threaded locking collar
3 – Boat receptacle
NOTICE: To prevent accidental
operation, the battery switches
must be pressed for two
seconds to turn off.
A
DANGER
Avoid fire, explosions, electrocution,
injury or death. Plugs and receptacles
for different systems are designed in
non-interchangeable configurations. A
plug from one system cannot fit another
system. Do not modify a shore power
cable. Use only commercially available
adapters for system modification.
Ventilate the boat interior by opening the
deck hatches, windows and cabin door
to provide adequate ventilation.
The shore power system requires a
special, marine grade, three-conductor
cable to make a proper connection to
the shore. Dockside connections and
the boat side connections are plug-in.
Boat side connections are also locked in
position with a threaded locking collar
to prevent accidental disconnection and
enhance water resistance. The shore
power connection is located at the port
aft of your yacht. Make sure the shore
power connection covers are in place
and the access hatch is closed when the
shore power connection is not in use.
COB_0059_A
1
3
2