3-22
343 Owner’s Manual
Section 3
Performance Yacht
AIR/TEMP/WATER -
Toggle the lower switch below
to go between air and water temperature readings.
The gauge will display AIR and WATER to indicate
which temperature source is in use.
BLOWER -
This switch activates the engine
compartment ventilation blower to remove
explosive fumes from the area. The blower must be
operated for a minimum of four minutes each time
before starting the engines or generator. In
addition, the blower should be operated
continuously when at idle or running at slow
speeds.
HORN -
This switch activates the horn. Press the
switch to activate.
BILGE FWD (Fore Bilge Pump) -
This switch
manually controls the fore bilge pump.
BILGE MID (Mid-ship Bilge Pump) -
This switch
manually controls the mid-ship bilge pump.
BILGE AFT (Aft Bilge Pump) -
This switch
manually controls the aft bilge pump.
ACC (Accessory) -
This switch is available to
operate a switched accessory item.
2. GAUGE CLUSTER AND FUNCTIONS -
The
gauges are described starting from left to right and
clockwise.
Water Pressure - Port
Water Pressure - Starboard
Oil Pressure - Port
Tachometer - Port
Speedometer
Tachometer - Starboard
Oil Pressure - Starboard
Oil Temperature - Starboard
Water Temperature - Starboard
Voltmeter - Starboard
Voltmeter - Port
Water Temperature - Port
Oil Temperature - Port
Fuel Level
3. TRIM TAB/DRIVE UNIT TRIM INDICATOR -
The
indicators display the relative position of the drive
units and trim tabs. The left indicator set displays
the UP and DOWN position of the trim tabs. The
right indicator set displays the IN and OUT position
(trim angle) of the drive units.
4. TRIM TAB SWITCHES -
These switches control
the trim angle of the trim tabs. These used in
conjunction with the drive unit trim will maximize the
performance and ride of the boat.
TRIM PORT -
This switch activates the port trim
tab. The trim tab controls the starboard bow
movement of the boat in relation to the horizon.
TRIM BOTH -
This switch activates both trim tabs
to control movement of the bow in relation to the
horizon.
TRIM STBD -
This switch activates the starboard
trim tab. The trim tab controls the port bow
movement of the boat in relation to the horizon.
5. SHIFT/THROTTLE CONTROL PANEL -
a. Throttle Levers
b. Drive Unit Trim Switch
c. Shift Levers
6. DRIVE UNIT TRIM SWITCHES -
These switches
control the trim angle of the drive units. These used
in conjunction with the trim tabs will maximize the
performance and ride of the boat.
DRIVE PORT -
This switch controls the trim angle
of the port drive unit.
DRIVE BOTH -
This switch controls the trim angle
of both drive units.
DRIVE STBD -
This switch controls the trim angle
of the starboard drive unit.
7. STEREO REMOTE CONTROL
(standard on
dash, transom mount, optional) -
This panel
provides remote control of the stereo system from
the helm.
COB_343_OM_forWeb.book Page 22 Monday, June 12, 2006 10:20 AM