SD301 Access Appliance
User’s Guide 17
7
Troubleshooting Connection Problems
The
P
(Power) and
S
(Sync) LEDs should be ON; and you should see the
T (Transmit) and R (Receive) LEDs flash when you attempt to browse the
Internet.
If the
S
or
F
LED is blinking or no LEDs are on, check all the hardware
connections and cables (refer to
Connecting to the Access Appliance
).
If the
P
,
S
, and
D
LED is ON, then the Access Appliance is functioning
correctly; but it has not been enabled and you should contact your service
provider for service activation.
If this problem persists, contact your service provider for assistance. (See
also page 7 for a description of the Front Panel status LEDs.)