background image

FITTING INSTRUCTIONS

KM078 & KM130 LEVER DOOR HANDLE ON BACKPLATE

LIT-FI-KM078/KM130

Page 6 of 6

T

 01726 871 025    

E

 [email protected]    

W

 coastal-group.com

 

y

DO NOT use abrasive materials, files or 
other hard objects against the 
product surface.

 

y

This product should be protected from 
dust and dirt during any 
construction work.

If this product has a polished stainless steel 
or satin stainless steel finish, then our DR121 
Stainless Steel Renovation Kit should be used 
at least every six months to help maintain 
this product in pristine condition.

 

y

The DR121 cleaner is a liquid solution 
that cleans and polishes, removing 
contamination, tarnish, tea staining, 
surface rust and on-site dust and dirt 
without attacking the metal.

 

y

This cleaner is essential for keeping 
hardware cleaned and maintained 
especially when fitted to property 
situated on or near the coast.

 

y

DR121-CO is a neutral liquid conditioner 
for use after the metal surface has 
been cleaned with DR121-CL cleaner.

 

y

The conditioner can also be used for 
daily cleaning and maintenance of 
slightly soiled metal surfaces.

Refer to Care and Maintenance Guide 
for further information and remember to 
protect handle during building works.

For more information contact us using the 
details below.

Summary of Contents for KM078







Reviews: