FITTING INSTRUCTIONS
DKB200 RING DOOR KNOCKER
LIT-FI-DKB200
Page 2 of 6
T
01726 871 025
E
W
coastal-group.com
Measure where the
centre line is on the
door.
Confirm at what
height location you
would like Door
Knocker to be
positioned on the
door.
2
Keeping the template
in place on the door,
drill the 2 x 3mm holes,
4mm deep, for the
Anti-spin Pegs.
Note: The holes should
be only 4mm deep.
Then drill 3mm pilot
holes for the Fixing
Bolts all the way
through the door.
Align the centre line
shown on the supplied
Hole Drilling Template
with the centre line of
the door.
Ensure template is
positioned square
and plumb on the
door then fix top and
bottom of template to
door using a
low-tack adhesive
masking tape.
4
3
1
