Sizes Available:
150-03000
AWNING WALL KIT
TO SUIT
12'ROLLOUT AWNING
150-03010
AWNING WALL KIT
TO SUIT
13' ROLLOUT AWNING
150-03020
AWNING WALL KIT
TO SUIT
14' ROLLOUT AWNING
150-03030
AWNING WALL KIT
TO SUIT
15' ROLLOUT AWNING
150-03040
AWNING WALL KIT
TO SUIT
16' ROLLOUT AWNING
150-03050
AWNING WALL KIT
TO SUIT
17' ROLLOUT AWNING
150-03060
AWNING WALL KIT
TO SUIT
18' ROLLOUT AWNING
Step 1
Rollout your awning to the patio position as shown
Take the pull-down strap out of the awning roller tube
Peg/ secure the awning legs to the ground
Your awning roller tube should be set at 6 ‘o clock, i.e. the
third grooved track is facing straight down
Step 2
It is recommended to set the front roller tube height to
6’1” - 6’3” (1.86mt - 1.91mt) on the left and right side of
the awning (measuring from the bottom of the roller
tube to the ground)
Unpack your Awning Wall Kit and locate the front wall
panel—this has zips at both ends
Step 3
Unzip the transition piece from the front wall (this makes
threading it through the rope track on your roller tube
much easier)
With the zipper facing you, thread the transition piece
through the rope track
Ensure the transition piece is now positioned in the middle
of the roller tube. You can check this by measuring the
distance from the end of the transition piece to the end of
the roller tube on the right side. Once you have this meas-
urement, compare it to the left side.
Step 4
It’s now time to attach the front wall to the transition
piece
Make sure the flyscreen is facing you and clip the front
wall to the transition piece using the caribee clips
Once this is done, you can zipper the two pieces togeth-
er, creating a solid barrier against the elements
Patio Position
Front Wall
