9
eVenue Tempo
H a r d w a r e I n s t a l l a t i o n
Hardware Installation
This section outlines how to connect and power your eVenue Tempo system.
Caution:
When connecting, all volume controls should be turned down to prevent possible equipment damage;
then, adjust to the desired level after the inputs/outputs are connected.
Tempo Control Unit I/O Connection Panel
This section outlines the I/O connection panel to utilize your eVenue Tempo Control Unit.
1.
Mic:
Microphone-level input (female)
2.
Tempest FX (Stage):
FX audio input from Tempest FX Voice Announce output (female)
Tempest FX LAN:
FX network Ethernet connection
3.
MP3 Player Port:
Connection for 1/8 in. auxiliary cable
4.
USB Ports:
Used to connect the eVenue Tempo Remote and USB flash drives (to load the Tempo script).
5.
Output to ePods (Left, Center, Right):
Audio 6-pin connections to ePods (male)
6.
Power Connection
: Power input for the Control Unit
ePod I/O Connection Panel
This section outlines the I/O connection panel needed to utilize your eVenue ePod(s).
1.
eVenue Commando-e Remote:
Remote connector input for eVenue Commando-e Remote to
raise arm and tilt the Upper Speaker Array. The eVenue Commando-e Remote allows four different
deployment presets (male)
2.
Input:
Audio-in from eVenue Tempo Control Unit (female) or other ePod
3.
Thru:
Used for daisy-chaining multiple ePods together. A 6-pin female XLR plugs into the Thru
connection (male)
Figure 10: Control Unit I/O Connection Panel
Figure 11: ePod I/O Connection Panel
