Coachcare B02T User Manual Download Page 3

5

4

NOTE!

Warning

• This device contains sensitive electronic components. Avoid strong electrical or 
electromagnetic fields in the direct vicinity of the device (e.g. mobile telephones, 
microwave ovens) during use. These can lead to erratic results.
• Do not attempt to service or repair this device yourself. Should a malfunction 
occur, refer to a local distributor or the manufacturer.

1. Too frequent measurements can cause injury to the PATIENT due to blood 
flow interference.
2. Do not place the cuff over a wound.
3. Pressurization of the CUFF can temporarily cause loss of function if you 
are simultaneously monitoring ME equipment on the same limb.

Warning:

The device contains sensitive electronic components. Avoid 
strong electrical or electromagnetic fields in the direct vicinity of 
the device (e.g. mobile telephones, microwave ovens). These 
can lead to temporary impairment of the measuring accuracy.

Warning:

Do not use cuffs, AC adapters or batteries other than those 
included with this product or replacement parts supplied by 
the manufacturer.

Warning:

Do not use the batteries and the AC adapter to provide power 
at the same time.

Warning:

This system may fail to yield specified measurement accuracy if 
operated or stored in temperature or humidity conditions outside 
the limits stated in the specifications section of this manual.

Warning:

The separate AC adapter which is intended to connect USB 
interface of Blood Pressure Monitor has not been evaluated 
according to IEC 60601-1. The safety of the product shall be
reappraised when its power supply is by a separate AC adapter.

Note:

To obtain the greatest accuracy from your blood pressure 
instrument, it is recommended that the instrument be used 
within the specified temperature and the relative humidity, 
please see the Technical Specifications.

Note:

The cuff is treated as the applied part.The user should contact 
the manufacturer for assistance, if needed, in setting up, using 
or maintaining the device.

Warning:

Remove the battery if the equipment is not likely to be used for 
some time.

Warning:

The user must check that the equipment functions safely and 
see that it is in proper working condition before being used.

Warning:

No modification of this equipment is allowed.

Warning:

Use of power adapters
1. Adapter: input 100-240v, 50/60hz output DC 5V 1A
2. Do not position the device to make it difficult to disconnect the 
device while using adapter.
3. Do not allow the device to be prone to water leakage, high 
temperature, moisture, direct sunlight or a corrosive gas 
environment. Do not use this product in the above environment.

Warning:

The device is not suitable for use in the presence of flammable 
anesthetic mixtures with air or with oxygen or nitrous oxide.

Warning:

This equipment shall not be serviced or maintained while in 
use with the patient.

Warning:

The patient is an intended operator, the functions of 
monitoring blood pressure and pulse rate can be safely used 
by patient. The routine clean and changing batteries can be 
performed by the patient.

Caution:

To avoid any possibility of accidental strangulation, keep this unit 
away from children and do not drape tubing around your neck.

Caution:

To avoid damaging the device, keep this unit away from children 
and pets.

Caution:

The standard material used for the bladder and tubing is latex-free.

Attention:

Self-measurement means control, not diagnosis or treatment. 
Unusual values must always be discussed with your doctor. 
Under no circumstances should you alter the dosages of any 
drugs prescribed by your doctor.

Attention:

The pulse display is not suitable for checking the frequency of 
heart pacemakers!

Attention:

In cases of irregular heartbeat, measurements made with this 
instrument should only be evaluated after consultation with 
your doctor.

Contraindication

Use of this instrument on patients under dialysis therapy or on anticoagulant, 
antiplatelets, or steroids could cause internal bleeding.

1.2 Warnings and Precautions

Summary of Contents for B02T
















Reviews: